Customer Portal

CXDI-401C Wireless

1040-6

The CXDI-401C Wireless Digital Radiography System can upgrade your existing radiographic suite or can be retrofitted to an upright stand, universal stand, or imaging table. It provides high resolution images, as a result of a pixel pitch of just 125 microns, with a low X-ray dose to the patient.

Features

HIGH RESOLUTION AND HIGH SENSITIVITY 

With a 125 micron pixel pitch, the CXDI-401C Wireless Digital Radiography System delivers exceptional spatial resolution. The high DQE (detector quantum efficiency) performance of the Cesium Iodide (CsI) scintillator and the LANMIT sensor help reduce the X-ray exposure to the patient.

WIRELESS RANGE 

The CXDI-401C Wireless Digital Radiography System has a range that can be calibrated for signal strength. Depending upon the room in which the CXDI-401C Wireless Detector is used, the power can be managed and potential interference can be reduced. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. Patient demographic data is not transmitted via wireless keeping the images anonymous. An optional wiring unit allows images to be transferred from a panel mounted in a bucky tray to the control computer over hard wire.

5 GHZ AND 2.4 GHZ DATA TRANSFER 

The CXDI-401C Wireless DR Detector runs at 5 GHz and 2.4 GHz on an 802.11n network that helps increase signal clarity – resulting in fast data transfer speed.

 

QUICK RESULTS 

An on-screen preview image is available approximately 4-6 seconds after exposure. An additional monitor (not included) can be added for the immediate viewing of high-resolution images in the emergency department or radiography suite.

BATTERY 

The battery lasts approximately 140 images and takes less than 3 hours to charge. The battery charger (sold separately) can charge up to 2 batteries at a time so a fresh battery can be continuously available. The control console includes a battery indicator for image count and power level monitoring. Additional batteries (sold separately) are also available.

PORTABLE AND FLEXIBLE 

Each individual CXDI-401C Wireless Digital Radiography System can be used in multiple X-ray rooms. Up to 10 detectors can be registered for use in any room. A check-in unit in each room identifies the particular detector being used there.

CXDI CONTROL SOFTWARE NE 

The CXDI-401C Wireless Digital Radiography System uses the Canon CXDI Control Software NE. The intuitive operation of this software gives a wide range of selections directly from the main menu and yet images can be taken within three touches. The CXDI Control Software NE also has advanced image processing that shows the subtle details of trabecular bone structure and soft tissue in the same image. For more information, visit our CXDI Control Software NE webpage.

CXDI-410C Wireless

XOGRAPH__1363084750_CXDI-701_01_800_601_s

Retro Fits to any Solution

Easy upgrade

Non Generator Connection mode

Graphical User Interface support with small sized PC

Improved water resistance

Large imaging area of 43 cm x 42 cm

High resolution with 125 micron pixel pitch

High sensitivity with CsI Scintillator

Approximately 140 images with a fully charged battery

Detection possible with just 2 devices

Up to four detectors can be used in one room, offering you maximum flexibility to accommodate the required workflow in your institute

Features

Canon’s CXDI-701C Wireless, cassette-size digital radiography system gives you more freedom for easy retrofit and upgrading options. The CXDI-701C Wireless system ensures best performance n workflow, sensitivity, image quality and versatility.

ULTRALIGHT AUTOMATIC EXPOSURE DETECTION (AED) WIRELESS DETECTORS

Utilising superlight and strong carbon fibre construction techniques, Canon has achieved significant weight reduction, providing less physical strain and reassuringly providing detectors that are among the lightest currently available. Despite their featherlight characteristics, the carbon fibre chassis and frame ensure high performance and high durability, tested for the rigours of demanding daily use. Superb quality and reliability that you have come to expect from Canon.

Dimensions: 42.6 x 41.5 cm, Weight: 2.8 kg

SLEEK NEW DETECTOR DESIGN

The sleek, tough and ergonomically sculpted new CXDI series wireless detector design includes the following features to enhance the user and patient experience:

– More comfortable to hold and effective to grip; concern over dropping can be greatly reduced due to the ultralight weight and ergonomic handgrips sculpted into the detector on all 4 sides.

– Easier and more pleasant to handle due to the selection of high quality composite materials, low weight and well-balanced design.

– Easier to position and more comfortable for patients and technologists due to a shaped cover, smooth rounded corners and more comfortable when positioning behind a patient.

THREE TOUGH DETECTORS

The use of new composite materials has not only decreased the weight of each detector, but is also beneficial for strength and durability. The new Canon CXDI series wireless detectors can withstand a load of 310 kg; that’s more than twice previous detectors and allows direct weight-bearing imaging with obese patients.

 
 
 

IPX7 WATERPROOF

Contact with fluids is an inevitability at some point during a medical product’s operational life, particularly in emergency and high dependency care. Canon CXDI series detectors are designed to cope with fluid soaking and even immersion. Compliant to IPX7, each detector can withstand up to 30 minutes in water to a depth of 1m without incurring damage. Another concern removed in favour of yet another great Canon product.

ON-BOARD IMAGE STORAGE

Designed to handle the unexpected, the new Canon CXDI series wireless detectors are even equipped with on-board image memory for those situations where you need the detector to be fully independent. These tough detectors are not only totally independent of any X-ray source you wish to work with, but now can even operate without reliance on any connected image archive. Up to 99 images may be stored and transferred to a workstation at your convenience.

DOCKING STATION

The new multi-function docking station combines the following capabilities in one compact desktop unit to help make your work and workflow even more convenient. 
The Docking Station enables:

– Detector check-in

– Detector battery charging

– Image transfer

IMPROVED WORKFLOW USING THE ‘READY’ FUNCTION

When using multiple detectors in one room, a specific detector can be selected not only from the DR modality workstation but also simply by pressing the ‘Ready’ button directly on the detector or on the optional Status Indicator.

 
 

CXDI CONTROL SOFTWARE NE

CXDI Control Software NE is made exclusively for use with Canon Digital Radiography systems. This imaging control and management software helps to optimise work¬flow and reduce the steps required to complete each examination quickly. The intuitive Graphical User Interface (GUI) can be used for all types of digital radiography mo¬dality and this commonality of GUI across the entire DR product range is a major advantage when it comes to speed of operator training, user confidence, convenience and familiarity. Canon CXDI-NE software configuration options ensure a GUI that is always right for you. Comprehensive image processing including ‘Scatter Correction’ and ‘Single-Shot’ long length imaging options guarantee optimised image quality with the lowest possible dose; the industry standard DICOM 3.0 interface ensures multi-vendor and cross-platform connectivity in any situation.

IMPROVED IMAGE QUALITY

Higher resolution quality, higher sensitivity, highest signal to noise performance. Enabling you to provide an enhanced level treatment to your patients.
Quality you can count on. Reliability and efficiency that provide you, and your department, the confidence that you see the full picture.
Digital radiography systems can save more than 60 per cent of your time, eliminating cassette handling and providing real-time viewing of high quality images.

GREAT SENSITIVITY

The versatile new CXDI-410C Wireless system expands the scope of Digital Radiography with improved diagnostic quality. New CXDI control software NE enhances workflows, provides immediate results and supports extensive network options. This configuration is the perfect choice for table, stand or universal and retrofit solutions.
Superb diagnostic image quality in a versatile, low dose digital radiography system. More sensitive than conventional systems, tailor-made for pediatric and orthopedic use.

CXDI 701C Wireless

XOGRAPH__1363084750_CXDI-701_01_800_601_s

Retro Fits to any Solution

Easy upgrade

Non Generator Connection mode

Graphical User Interface support with small sized PC

Improved water resistance

Large imaging area of 35cmx43cm

High resolution with 125 micron pixel pitch

High sensitivity with CsI Scintillator

Approximately 140 images with a fully charged battery

Detection possible with just 2 devices

Up to four detectors can be used in one room, offering you maximum flexibility to accommodate the required workflow in your institute.

Features

Canon’s CXDI-701C Wireless, cassette-size digital radiography system gives you more freedom for easy retrofit and upgrading options. The CXDI-701C Wireless system ensures best performance n workflow, sensitivity, image quality and versatility.

GREATER SENSITIVITY

The versatile new CXDI-701C Wireless system expands the scope of Digital Radiography with improved diagnostic quality. New CXDI control software NE enhances workflows, provides immediate results and supports extensive network options. This configuration is the perfect choice for table, stand or universal and retrofit solutions.
Superb diagnostic image quality in a versatile, low dose digital radiography system. More sensitive than conventional systems, tailor-made for pediatric and orthopedic use.

IMPROVED IMAGE QUALITY

Enhanced images. Higher resolution quality, higher sensitivity, highest signal to noise performance. Enabling you to provide an enhanced level treatment to your patients.
Quality you can count on. Reliability and efficiency that provide you, and your department, the confidence that you see the full picture.
Digital radiography systems can save more than 60 per cent of your time, eliminating cassette handling and providing real-time viewing of high quality images.

OPTIMIZED WORKFLOW

 

With the increasing emergence of telemedicine, an ageing population, as well as pressure on healthcare, patient volume is increasing, as an imaging professional you can optimize your workflow to concentrate on critical tasks by using DR solutions.
Up to four detectors can be used in one room, offering you maximum flexibility to accommodate the required workflow in your institute.

CONTROL SOFTWARE NE

The CXDI-701C Wireless Digital Radiography System uses the Canon CXDI Control Software NE. The intuitive operation of this software gives a wide range of selections directly from the main menu and yet images can be taken within three touches. The CXDI Control Software NE also has advanced image processing that shows the subtle details of trabecular bone structure and soft tissue in the same image. The optimized workflow reduces current operation steps and supports multiple study acquisition. The software delivers high-resolution images, generator communication* for preset x-ray parameters, provides actual exposure factors and patient dose information in the DICOM header. Three levels of access can be set for various users. Along with supporting Program Mode, the software complies with HIPAA standards and is IHE compliant.

CXDI-710C Wireless

230019_01_cxdi_710c_wireless_series_01

Retrofits to any Solution

Easy upgrade

Non-Generator Connection mode

Graphical User Interface support with small sized PC

Improved water resistance

Large imaging area of 35cmx43cm

High resolution with 125 micron pixel pitch

High sensitivity with CsI Scintillator

Approximately 140 images with a fully charged battery

Detection possible with just 2 devices

Up to four detectors can be used in one room, offering you maximum flexibility to accommodate the required workflow in your institute

Features

Canon’s next generation wireless detector line-up takes you to new heights of possibilities in Digital Radiography. Reduced weight, waterproof, on-board memory and enhanced detector design are just a few of the clinically beneficial new features. The CXDI-710C Wireless system ensures best performance in workflow, sensitivity, image quality and versatility.

ULTRALIGHT AUTOMATIC EXPOSURE DETECTION (AED) WIRELESS DETECTORS

Utilizing super light and strong carbon fiber construction techniques, Canon has achieved significant weight reduction, providing less physical strain and reassuringly providing detectors that are among the lightest currently available. Despite their featherlight characteristics, the carbon fiber chassis and frame ensure high performance and high durability, tested for the rigors of demanding daily use. Superb quality and reliability that you have come to expect from Canon.

Dimensions: 35.0 x 42.6 cm, Weight: 2.3 kg

SLEEK NEW DETECTOR DESIGN

The sleek, tough and ergonomically sculpted new CXDI series wireless detector design includes the following features to enhance the user and patient experience:

  • More comfortable to hold and effective to grip; concern over dropping can be greatly reduced due to the ultra lightweight and ergonomic handgrips sculpted into the detector on all 4 sides.
  • Easier and more pleasant to handle due to the selection of high-quality composite materials, low weight, and well-balanced design.
  • Easier to position and more comfortable for patients and technologists due to a shaped cover, smooth rounded corners and more comfortable when positioning behind a patient.

THREE TOUGH DETECTORS

The use of new composite materials has not only decreased the weight of each detector but is also beneficial for strength and durability. The new Canon CXDI series wireless detectors can withstand a load of 310 kg; that’s more than twice previous detectors and allows direct weight-bearing imaging with obese patients.

IPX7 WATERPROOF

Contact with fluids is an inevitability at some point during a medical product’s operational life, particularly in emergency and high dependency care. Canon CXDI series detectors are designed to cope with fluid soaking and even immersion. Compliant to IPX7, each detector can withstand up to 30 minutes in water to a depth of 1m without incurring damage. Another concern removed in favor of yet another great Canon product. 

ON-BOARD IMAGE STORAGE

Designed to handle the unexpected, the new Canon CXDI series wireless detectors are even equipped with on-board image memory for those situations where you need the detector to be fully independent. These tough detectors are not only totally independent of any X-ray source you wish to work with but now can even operate without reliance on any connected image archive. Up to 99 images may be stored and transferred to a workstation at your convenience.

DOCKING STATION

The new multi-function docking station combines the following capabilities in one compact desktop unit to help make your work and workflow even more convenient. 
The Docking Station enables:

– Detector check-in

– Detector battery charging

– Image transfer

IMPROVED WORKFLOW USING THE ‘READY’ FUNCTION

When using multiple detectors in one room, a specific detector can be selected not only from the DR modality workstation but also simply by pressing the ‘Ready’ button directly on the detector or on the optional Status Indicator.

CXDI CONTROL SOFTWARE NE

CXDI Control Software NE is made exclusively for use with Canon Digital Radiography systems. This imaging control and management software helps to optimize work¬flow and reduce the steps required to complete each examination quickly. The intuitive Graphical User Interface (GUI) can be used for all types of digital radiography mo¬dality and this commonality of GUI across the entire DR product range is a major advantage when it comes to speed of operator training, user confidence, convenience, and familiarity. Canon CXDI-NE software configuration options ensure a GUI that is always right for you. Comprehensive image processing including ‘Scatter Correction’ and ‘Single-Shot’ long length imaging options guarantee optimized image quality with the lowest possible dose; the industry standard DICOM 3.0 interface ensures multi-vendor and cross-platform connectivity in any situation.

IMPROVED IMAGE QUALITY

Higher resolution quality, higher sensitivity, highest signal to noise performance. Enabling you to provide an enhanced level treatment to your patients.
Quality you can count on. Reliability and efficiency that provide you, and your department, the confidence that you see the full picture.
Digital radiography systems can save more than 60 percent of your time, eliminating cassette handling and providing real-time viewing of high-quality images.

GREAT SENSITIVITY

The versatile new CXDI-710C Wireless system expands the scope of Digital Radiography with improved diagnostic quality. New CXDI control software NE enhances workflows, provides immediate results and supports extensive network options. This configuration is the perfect choice for table, stand or universal and retrofit solutions. Superb diagnostic image quality in a versatile, low-dose digital radiography system. More sensitive than conventional systems, tailor-made for pediatric and orthopedic use.

CXDI-801C Wireless

230019_01_cxdi_710c_wireless_series_01

The Canon CXDI-801C Wireless Digital Radiography System is designed to help healthcare professionals attain a high level of performance, usability, and reliability in a lightweight, compact form. By utilizing technology and solutions that help accelerate exams and maintain productive workflow, practitioners can effectively accomplish more while providing quality care. In X-ray Auto Detection mode, this DR system can detect X-rays at exposure and shift to image acquisition mode automatically without the use of a typical generator interface. The CXDI-801C Wireless System builds upon the successful CXDI-80C Wireless DR System with its high-quality image sensors that provide high-resolution images at a low X-ray dose, and incorporates additional customer-focused features, such as enhanced liquid intrusion protection, battery charging while in the detector with a wired option (sold separately), and impact detection. The CXDI 801C Wireless DR System is light and easy to handle, weighing only 5.1 pounds (with battery). This cassette-size detector has an approximate 11 x 14 inch imaging area, and is useful for a wide range of patients, including infants in the Neonatal Intensive Care Unit (NICU).

Features

Canon’s CXDI-701C Wireless, cassette-size digital radiography system gives you more freedom for easy retrofit and upgrading options. The CXDI-701C Wireless system ensures best performance n workflow, sensitivity, image quality and versatility.

HIGH RESOLUTION AND HIGH SENSITIVITY:

With a 125 micron pixel pitch, the CXDI-801C Wireless Digital Radiography (DR) System delivers exceptional spatial resolution. The high sensitivity of the Cesium Iodide (CsI) scintillator helps reduce the X-ray exposure to the patient. The maximum 3 second exposure time allows this digital detector to be used with tomography equipment and for other exams that may require an exposure time of up to 3 seconds.

PORTABLE AND FLEXIBLE: 

The CXDI-801C Wireless DR System may be used in multiple x-ray rooms. Simply “check in” the digital detector in the computer. The Infrared (IR) Communication module makes it easy to switch detectors among the systems. For easy transport, an optional handle is available.

WIRELESS RANGE: 

The wireless communication may be set for applicable strength, and, depending on the room where the CXDI-801C Wireless DR System is used, the power can be managed. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. An optional wiring unit allows images to be transferred from a panel mounted in a Bucky tray to the control computer over hard wire.

5 GHZ FOR FAST DATA TRANSFER: 

The CXDI-801C Wireless DR Detector runs at 5 GHz and 2.4 GHz on an 802.11n network that increases signal clarity – resulting in fast data transfer speed.

BATTERY: 

The battery lasts approximately 6.5 hours and takes less than 3 hours to charge. The battery can be charged in the unit with the wired option (sold seperately). An accessory battery charger (sold separately) can additionally charge up to 2 batteries at a time so a fresh battery can be continuously available. The control console includes a battery indicator for image count and power level monitoring. Additional batteries (sold separately) are also available.

CXDI CONTROL SOFTWARE NE: 

The CXDI-801C Wireless DR System uses the Canon CXDI Control Software NE. The software gives a wide range of selections and images can be taken with three touches. An on-screen preview image is available approximately 1-2 seconds after exposure. The image processing shows subtle details of trabecular bone structure and soft tissue in the same image. For more information, visit our CXDI Control Software NE webpage.

CXDI-810C Wireless

1048-6

Retrofits to any Solution

Easy upgrade

Non-Generator Connection mode

Graphical User Interface support with small sized PC

Improved water resistance

Small size detector with imaging area of 27.4cm x 35cm  (10.79 Inches x 13.78 Inches)

High resolution with 125 micron pixel pitch

High sensitivity with CsI Scintillator

Approximately 140 images with a fully charged battery

Detection possible with just 2 devices

Up to four detectors can be used in one room, offering you maximum flexibility to accommodate the required workflow in your institute

Features

Canon’s CXDI-701C Wireless, cassette-size digital radiography system gives you more freedom for easy retrofit and upgrading options. The CXDI-701C Wireless system ensures best performance n workflow, sensitivity, image quality and versatility.

ULTRALIGHT AUTOMATIC EXPOSURE DETECTION (AED) WIRELESS DETECTORS

Utilizing super light and strong carbon fiber construction techniques, Canon has achieved significant weight reduction, providing less physical strain and reassuringly providing detectors that are among the lightest currently available. Despite their featherlight characteristics, the carbon fiber chassis and frame ensure high performance and high durability, tested for the rigors of demanding daily use. Superb quality and reliability that you have come to expect from Canon.

Dimensions: 35.0 x 27.4 cm (10.79 Inches x 13.78 Inches), Weight: 1.8 kg (3.968 lbs)

SLEEK NEW DETECTOR DESIGN

The sleek, tough and ergonomically sculpted new CXDI series wireless detector design includes the following features to enhance the user and patient experience:

  • More comfortable to hold and effective to grip; concern over dropping can be greatly reduced due to the ultra lightweight and ergonomic handgrips sculpted into the detector on all 4 sides.
  • Easier and more pleasant to handle due to the selection of high-quality composite materials, low weight, and well-balanced design.
  • Easier to position and more comfortable for patients and technologists due to a shaped cover, smooth rounded corners and more comfortable when positioning behind a patient.
  • Three tough detectors

The use of new composite materials has not only decreased the weight of each detector, but is also beneficial for strength and durability. The new Canon CXDI series wireless detectors can withstand a load of 310 kg; that’s more than twice previous detectors and allows direct weight-bearing imaging with obese patients.

IPX7 WATERPROOF

Contact with fluids is an inevitability at some point during a medical product’s operational life, particularly in emergency and high dependency care. Canon CXDI series detectors are designed to cope with fluid soaking and even immersion. Compliant to IPX7, each detector can withstand up to 30 minutes in water to a depth of 1m without incurring damage. Another concern removed in favor of yet another great Canon product.

ON-BOARD IMAGE STORAGE

Designed to handle the unexpected, the new Canon CXDI series wireless detectors are even equipped with on-board image memory for those situations where you need the detector to be fully independent. These tough detectors are not only totally independent of any X-ray source you wish to work with, but now can even operate without reliance on any connected image archive. Up to 99 images may be stored and transferred to a workstation at your convenience.

DOCKING STATION

The new multi-function docking station combines the following capabilities in one compact desktop unit to help make your work and workflow even more convenient. 
The Docking Station enables:

  • Detector check-in
  • Detector battery charging
  • Image transfer
  • Improved workflow using the ‘ready’ function

When using multiple detectors in one room, a specific detector can be selected not only from the DR modality workstation but also simply by pressing the ‘Ready’ button directly on the detector or on the optional Status Indicator.

CXDI CONTROL SOFTWARE NE

CXDI Control Software NE is made exclusively for use with Canon Digital Radiography systems. This imaging control and management software helps to optimize work¬flow and reduce the steps required to complete each examination quickly. The intuitive Graphical User Interface (GUI) can be used for all types of digital radiography mo¬dality and this commonality of GUI across the entire DR product range is a major advantage when it comes to speed of operator training, user confidence, convenience, and familiarity. Canon CXDI-NE software configuration options ensure a GUI that is always right for you. Comprehensive image processing including ‘Scatter Correction’ and ‘Single-Shot’ long length imaging options guarantee optimized image quality with the lowest possible dose; the industry standard DICOM 3.0 interface ensures multi-vendor and cross-platform connectivity in any situation.

IMPROVED IMAGE QUALITY

Higher resolution quality, higher sensitivity, highest signal to noise performance. Enabling you to provide an enhanced level treatment to your patients.
Quality you can count on. Reliability and efficiency that provide you, and your department, the confidence that you see the full picture.
Digital radiography systems can save more than 60 percent of your time, eliminating cassette handling and providing real-time viewing of high-quality images.

GREAT SENSITIVITY

The versatile new CXDI-710C Wireless system expands the scope of Digital Radiography with improved diagnostic quality. New CXDI control software NE enhances workflows, provides immediate results and supports extensive network options. This configuration is the perfect choice for table, stand or universal and retrofit solutions.
Superb diagnostic image quality in a versatile, low-dose digital radiography system. More sensitive than conventional systems, tailor-made for pediatric and orthopedic use.